Beam light daily maintenance
2017-08-11
Beam light daily maintenance
Power supply maintenance: First of all, before each use, to check the power cord is stable, there is no socket contact bad situation, promptly ruled it out, try to ensure that the site voltage stability, it is best to install the regulator, because the wiring problem or voltage Stable voltage input will lead to instability. Voltage instability in the case, the first threat is the beam light power, there will be a chance to burn the power supply. Second, each use must be in accordance with order plugging first then the switch to avoid the power supply by the sudden impact of high voltage current, affecting the life of the power supply. Finally, after each use must first turn off the lamp, wait 5 minutes and then turn off the power switch, and finally pull the power cord of moving head light
Lamp maintenance: First, do not control the light bulb light and turn off frequently, each time the light bulb or turn off the light bulb between the time interval control in 5 minutes or more, because the light bulb control is through the light of 380 volts high voltage current shock , if the frequent open or off the light bulb, will seriously affect the lamp life. Second, after each use, do not immediately turn off the power switch, you should first turn off the bulb, such as light bulb cooling 5-10 minutes (depending on the weather and ambient temperature may be), and then turn off the power switch, and finally pull the power cord of moving head light
The Optical lens maintenance: optical lens is a high-precision optical instruments, each light optical lens has a different focal length, the lens surface coated with optical anti-reflective film, the thickness of the anti-reflective film to determine the light effect is good or bad, specifically We see the color of the lens reflex. Antireflective film is more fragile, careful not to use hard, sharp objects touch, so easy to scratch the anti-reflective film, cleaning the lens surface dust, with soft paper towels stained with water erosion or direct hand to touch, remember.
